Hour Meter
The hour meter indicates the accumulated
operation time of the engine.
The number in red figures on a white
background is incremented every thirty-six
seconds.
The number in white figures on a black
background is incremented every hour.
1/100 wheel
…
red figures on a white
background
Hour wheel
…
white figures on a black
background
2
1
uknn6v-007
Hour Meter_001
1
1/100 wheel
2
Hour wheel
Water Temperature Gauge
This instrument indicates the water
temperature inside the engine.
If the water temperature gauge indicates a
level close to "H" during operation, the machine
is overheated.
Remove the load from the engine, idle the
machine for five minutes, stop the engine, and
then inspect the machine and perform any
necessary maintenance.
1
igozke-001
Water Temperature Gauge_001
1
Water temperature gauge
Pilot Lamps
Charge Lamp
The charge lamp is the left pilot lamp located
in the operation panel.
It turns on when the ignition key is set to the
"ON" position before the engine starts. It turns
off when the engine starts and the alternator
starts operating properly.
If this lamp illuminates while you are operating
the machine, stop the engine immediately,
and then inspect the machine and perform
any necessary maintenance.
1
ifzqmc-002
Charge Lamp_001
1
Charge lamp
Description of Functions
LM311
Description of Functions
Page 4-9
Instruments on The Operation Panel
