Baroness LM285, Owner'S Operating Manual, Page: 34 / 65

Portion Code Part name
Tightening torque
Thread locking
adhesive
N-m kgf-cm lb-in
Engine
K0017100252
Bolt, heat-treated, small,
10-25 P1.25
Since it may be difficult to tighten bolts and nuts
in the upper front left area of the engine, the
strength category should be 4.8 torque. (See
"Standard tightening torques" (Page 4-12) .)
K4040000150
Nut for attaching anti-
vibration rubber
28
–
38
285.57
–
387.49
247.83
–
336.34
○
Coupling
K0024100351
Bolt, 12T, w/hexagon
hole, M10-35
60
–
70
611.82 –
713.79
531.06 –
619.57
－
K0013100352
Bolt, 11T, heat-treated
M10-35
45 – 76
158.87
–
774.97
398.30
–
672.68
－
K0010100202
Bolt, 11T, heat-treated
M10-20
45
–
76
158.87
–
774.97
398.30
–
672.68
○
K0010080202
Bolt, 11T, heat-treated
M8-20
23
–
38
234.53 –
387.49
203.57 –
336.34
○
Bed knife (Bottom
blade)
K0071000092
Screw, heat-treated
flathead M10-20
29
–
38
295.71
–
387.49
256.68
–
336.34
－
Arm frame
Roll bar
K0013120302
Bolt, 11T, heat-treated
M12-45
52 – 67
530.24
–
683.20
460.25
–
593.02
－
Adjustment Before Operating
Adjustment of Seat
Use the seat adjustment lever to adjust the seat
back and forth.
Adjust the position according to the operator's
body size.
The adjustment lever is located beneath the
front part of the seat.
1
s1gskp-002
Adjustment of Seat_001
1 Adjustment lever
Adjustment of Blade Engagement
Caution
Before cutting newspaper as a test, be sure
to stop the engine and wear gloves to protect
your hands.
Pay attention not to let the reel cutter (cutting
cylinder) catch your gloves. Otherwise, you
may injure your hand or fingers.
Caution
Before adjusting the blade engagement, be
sure to set the reel rotation/stop switching
lever for the reel motor (attached to the
mower unit) to the "Stop" position.
1
A
B
2f8equ-002
Adjustment of Blade Engagement_001
LM285
Handling Instructions
Page 4-14
Adjustment Before Operating