Baroness LM281, Owner'S Operating Manual

Page: 68 / 92

Rear left pivot
rwyt62-022
Jack-Up Points_005
Rear center frame
rwyt62-023
Jack-Up Points_006
Greasing
About Greasing
Since there may be adhesion or damage due
to lack of grease on moving parts, they must
be greased.
Add urea-based No. 2 grease in accordance
with the Maintenance Schedule.
Other locations where the specified grease or
lubricant is used are indicated in "Greasing
Points".
Add grease using the specified grease or
lubricant.
4.
5.
Greasing Points
Grease nipples are installed in the following
locations.
Add grease every 50 hours of operation.
7
8
9
10
1
3
5
6
11
2
4
8bq62b-385
Greasing Points_001
Location
No. of
greasing
points
1 Front roller 6
2 Rear roller 6
3 Housing 6
4 Mower frame fulcrum 3
5 Lift arm fulcrum 3
6 Idle lever fulcrum 1
7 Pivot 3
8 Piston pump 2
9 Traveling pedal fulcrum 1
10 Traveling pedal shaft fulcrum 1
11 Brake lever shaft 2
LM281
Maintenance
Page 5-6
Greasing