Baroness LM281, Owner'S Operating Manual

Page: 67 / 92

Jacking Up The Machine
About Jacking Up The Machine
Warning
When replacing a tire or beginning any other
maintenance or repairs, be sure to chock the
wheels to prevent the machine from moving.
Before jacking up the machine, park it on a
hard, flat surface such as a concrete floor and
remove any obstacles that could prevent you
from performing the work safely.
When necessary, use an appropriate chain
block, hoist, or jack.
Support the machine securely with jack stands
or appropriate blocks.
Failure to do so may cause the machine to
move or fall, resulting in injury or death.
Use the jack-up points identified in this manual
when jacking up the machine.
Only place a jack under the jack-up points
specified.
Placing a jack at any other point could result in
damage to the frame or other parts.
Jack-Up Points
1
3
4
5
2
rwyt62-079
Jack-Up Points_001
1 Front right frame
2 Front left frame
3 Rear right pivot
4 Rear left pivot
5 Rear center frame
Front right frame
rwyt62-019
Jack-Up Points_002
Front left frame
rwyt62-020
Jack-Up Points_003
Rear right pivot
rwyt62-021
Jack-Up Points_004
1.
2.
3.
Maintenance
LM281
Maintenance
Page 5-5
Jacking Up The Machine