Baroness LM281, Owner'S Operating Manual

Page: 47 / 92

Adjustment of Reel Cover
Note:
Depending on the specifications, this function
may not be available.
The angle of the reel cover can be adjusted.
Pull the right and left knobs securing the reel
cover to release it.
2
1
3
A
B
C
D
1qbdtn-003
Adjustment of Reel Cover_001
1 Reel cover
2 Knob
3 Cover adjustment plate
A Fully open
B 15 degrees closed
C 30 degrees closed
D Fully closed
Select the hold position of the cover
adjustment plate and secure the reel cover.
Adjustment of CR Brush
Note:
Depending on the specifications, this function
may not be available.
Important
Pressing the brush against the roller too tightly
will cause the belt to slip or break.
Important
CR brush prevents clippings etc. from
adherence to the rear roller owing to rotating
brush.
1.
2.
Loosen the bolts and nuts attached to the
both ends of CR brush.
1
3
4
1
2
zp6tso-001
Adjustment of CR Brush_001
1 Bolts
2 Nuts
3 Brush
4 Rear roller
Securely tighten the loosened bolts and nuts
as the gap between the brush and rear roller
is adjusted to between 0 and 1.0 mm (0 -
0.039 in).
1.
2.
Handling Instructions
LM281
Handling Instructions
Page 4-17
Adjustment before Work