Baroness LM2700, Service Manual

Page: 271 / 325

1 Rod ends
2 Adjusting nut
3 U nut
4 Screw shaft
5
Default adjusted value [7.0 mm (0.28
in)]
6
Default adjusted value [140.0 mm
(5.51 in)]
7
Default adjusted value [10.0 mm (0.39
in)]
Groomer Assy
Removal of Groomer Assy
Note:
Depending on the specifications, this function
may not be available.
Danger Danger
The reel cutter (cutting cylinder), bed knife
(bottom blade), and groomer blades are all
edged tools.
Handle them carefully, since they could cut
your hands and feet.
Remove the mower unit. (See "Removal of
Mower Unit" (Page 8-10) .)
Turn up the mower units.
1
bwen8e-001
Removal of Groomer Assy_001
1 Mower unit
1.
2.
Remove the stop bolt and seal washer from
the reel housing.
3
4,5
2
1
ywised-001
Removal of Groomer Assy_002
1 Mower unit
2 Groomer Assy
3 Reel housing
4 Stop bolt
5 Seal washer
Remove the U nut and washer used to
install the groomer housing.
3,4
2
1
ywised-002
Removal of Groomer Assy_003
1 Groomer
2 Groomer housing
3 U nut
4 Washer
3.
4.
Op
erating
Machin
e an
d
Mower Units
LM2700
Operating Machine and Mower Units
Page 8-23 Removal and installation of each section