Baroness LM2700, Service Manual

Page: 163 / 325

Follow the steps below to adjust the
proximity sensor.
Loosen the two bolts so that the switch
mounting bracket can be moved.
Gradually move the proximity sensor on
the switch mounting bracket.
Tighten the two bolts in the position
where the proximity sensor which has
been illuminated is turned off.
4
1
2
3
2
3
mffj4c-001
Anti-Falling Circuit_001
1 Proximity sensor
2 Bolt
3 Proximity sensor adjustment hole
4 Mower unit up/down lever
6.
[1]
[2]
Parking Brake Switch
The parking brake is equipped with a parking
brake switch, one part of the interlock system.
The switch contact point is activated through the
operation of the brake pedal, controlling starting
and stopping of the engine.
1
2
3
4
5
67xzzh-001
Parking Brake Switch_001
1 Brake pedal
2 Switch contact point
3 Adjusting nut A
4 Adjusting nut B
5 Parking brake switch
Depress the brake, pull the parking brake
lever, and apply the parking brake. (See "RT
mechanical brake manual" (Page 10-12) .)
Important
After adjusting the foot brake wire, check that
the machine is firmly stopped with the parking
brake at notch 5 - 6. (See "Adjusted Value of
the Foot Brake Wire" (Page 7-2) .)
1
2
67xzzh-005
Parking Brake Switch_002
1.
Elec
trical sy
stem
LM2700
Electrical system
Page 6-15 Adjustment