Match the center of the fulcrum seat hole
and the blade adjusting screw.
OK
：
The center of the fulcrum seat hole and
the center of the cutter adjusting bolt match.
NG
：
The center of the fulcrum seat hole and
the center of the cutter adjusting bolt do not
match.
B
A
1
1
2
2
kx7caa-009
Installing The Bed Knife Base_009
1
Fulcrum seat
2
Cutter adjusting bolt
A
OK
B
NG
Important
Make sure that the cam bush doesn
’
t move
from the marked position.
Tighten the lock nut on the cutter pin on
both sides.
B
kx7caa-010
Installing The Bed Knife Base_010
1
Lock nut
12.
13.
Removing/Installing The Bed Knife
Removing The Bed Knife
Caution
Both the reel cutter (cutting cylinder) and the
bed knife (bottom blade) are edged tools.
Handle them carefully, since they could cut
your hands and feet.
Caution
Raising the front part of the machine for
servicing operation may create a falling
hazard.
Support the machine securely.
Remove the bed knife base COMP.
Place the bed knife base COMP on a stable
workbench.
Remove the bed knife by loosening the
screw with a hammer driver or punch.
2
3
1
mbl5jl-001
Removing The Bed Knife_001
1
Bed knife base
2
Bed knife
3
Screw
1.
2.
3.
LM18GB
・
LM56GB/LM66TB
Maintenance
Page 6-14
Maintenance (Mower)
