Engine Clutch Cover
The engine clutch cover is on the left side of
the engine, covering the engine clutch.
Turn the fastening bolt counterclockwise to
open the cover and turn the bolt clockwise after
closing it. (by 4-5 turns).
A
B
1
2
paspfk-001
Engine Clutch Cover_001
1
Engine Clutch Cover
2
Fastening bolt
A
Loose
B
Tight
Groomer Clutch Lever
Note:
Depending on the specifications, this function
may not be available.
Caution
The lever should be operated while the engine
rotation is stopped, and adjusted to the
position suitable for your work.
The groomer clutch lever is at the top of the
right frame.
There are three changeover positions.
When the lever is in the "Normal rotation"
position, the groomer rotates in the same
direction as the blade reel cylinder.
When the lever is in the "Reverse rotation"
position, the groomer rotates in the opposite
direction of the blade reel cylinder.
When the lever is in the "Rotation stop"
position, the groomer does not rotate.
1
2
3
aqilnf-001
Groomer Clutch Lever_001
1
Normal rotation
2
Reverse rotation
3
Rotation stop
IGCA (Independent Grass Catcher Arm)
Note:
Depending on the specifications, this function
may not be available.
(IGCA can be equipped to the LM18GB and
LM56GB.)
IGCA is located above the mower.
IGCA (Independent Grass Catcher Arm) is a
mechanism which doesn't allow the mower
cutting height to change even if the amount of
grass in the grass catcher increases.
BARONESS eliminated as much operator error
as possible by allowing more movement on the
handle without effecting the cutting head.
The cutting head will stay in the same stable
position and continue cutting the turf, even if
the handle is operated in a rough manner, the
cutting height will not change from start to
finish.
The operator is able to cut the green with the
same balanced uniformed cut and consistent
HOC cut regardless of the operator's skill level
or ability.
1
4fx8ud-001
IGCA (Independent Grass Catcher Arm)_001
1
IGCA
LM18GB
・
LM56GB/LM66TB
Handling Instructions
Page 5-30
Operation of Each Section
