Baroness LM101, Owner'S Operating Manual, Page: 77 / 88

Adjustment of Brake
Caution
If the brake wire is severed, this machine will
be unable to stop.
If there are cracks, damage, or other defects,
replace it immediately.
Caution
Adjust the brake wire if the brakes become
less effective, even when applying the brakes.
Caution
Brakes with different effectiveness on the left
and right sides may result in an unexpected
accident.
Adjust the brake with the brake wire lock nut.
1
nfzln9-023
Adjustment of Brake_001
1 Lock nut
Follow the same steps to adjust the brake on
the opposite side.
Move the brake lever from the lock to unlock
position.
A
B
1
v2e27i-037
Adjustment of Brake_002
1.
2.
3.
1 Brake lever
A Lock
B Unlock
Loosen all the brake wire lock nuts on the
underside of the handle cover.
Raise or lower the adjustment bolt with the
lock nut to adjust the wire so there is a little
play in the left and right brake wires.
Raise or lower the adjustment bolt with the
lock nut to adjust the wire so the left and
right brake wires are tight when the brake
lever is locked.
Raise or lower the adjustment bolt with the
lock nut to adjust the wire if the brakes are
not effective when the brake lever is locked,
or if the brake shoes drag when the lock is
released.
Make sure that the left and right brakes are
applied firmly and equally.
Repeat the above procedures to adjust the
brake wire.
5
1
2
3
4
B
A
hesewo-001
Adjustment of Brake_003
1 Handle cover
2 Brake wire
3 Lock nut
4 Adjustment bolt
5 Brake lever
A Lock
B Unlock
4.
5.
6.
7.
8.
9.
Maintenance
LM101
Maintenance
Page 5-25
Maintenance Work