Baroness LM101, Owner'S Operating Manual, Page: 71 / 88

Replacement of Bed Knife (Bottom Blade)
Caution
Both the reel cutter (cutting cylinder) and the
bed knife (bottom blade) are edged tools.
Handle them carefully, since they could cut
your hands and feet.
Caution
Wear gloves when touching edged tools to
avoid cutting your hands.
The criteria for replacing the bed knife (bottom
blade) are described below.
However, these criteria are only a reference
and do not guarantee performance like that of
a new bed knife (bottom blade).
When the reel cutter (cutting cylinder) is
ground
When the reel cutter (cutting cylinder) is
replaced
When the bed knife (bottom blade) is worn
Standard blade
Replace the bed knife (bottom blade) before it
no longer has a front face.
A
2
1
d5gd5v-002
Replacement of Bed Knife (Bottom Blade)_001
1 Bed knife (bottom blade)
2 Mounting hole
A Front face
1.
2.
3.
Removing/Installing The Bed Knife Base
Removal of Bed Knife Base
Caution
Both the reel cutter (cutting cylinder) and the
bed knife (bottom blade) are edged tools.
Handle them carefully, since they could cut
your hands and feet.
Caution
While operations are performed with the front
of the machine raised, it may fall.
Securely support the machine.
Lower the roller bracket so that it does not
contact the reel cover, and then remove the
bolts.
1
1
2
3
5ttm1g-005
Removal of Bed Knife Base_001
1 Bolt
2 Roller bracket
3 Reel cover
Remove the reel cover.
1
5ttm1g-006
Removal of Bed Knife Base_002
1 Reel cover
1.
2.
Maintenance
LM101
Maintenance
Page 5-19
Maintenance Work