Baroness LM101, Owner'S Operating Manual, Page: 54 / 88

Maintenance Precautions
Caution
First, learn well the maintenance operations
you plan to perform.
Important
Use tools appropriate for each maintenance
operation.
Important
For the safe and best performance of your
machine, use Baroness genuine parts for
replacement and accessories.
Please note that our product warranty may be
void if you use non-genuine parts for
replacement or accessories.
Position of Mower during Maintenance
Important
If the mower handle is left leaned on the
ground for a long time during maintenance
engine oil may enter the engine combustion
chamber and cause the engine to run
improperly.
Be careful not to keep this position long and
ensure sufficient time for any oil to drain back
by returning to upright position for ten minutes
before starting.
Important
An attitude of the machine tilting toward the
handle side at a large angle may cause the
engine malfunction.
Note:
The attitude of the machine tilting toward the
handle side at a large angle is a state where the
engine tilts more than 30 degrees from the
upright position.
For maintenance of the machine fitted with
the traveling wheels:
Use the maintenance stand to prevent from
the engine malfunction.
･
Caution
Pay attention to the machine standing up with
the maintenance stand lifted up when large
power is added to the mower unit of the
machine tilting toward the handle side.
Park the machine on a level place.
Tilt it slowly toward the handle side and
pass the main clutch lever through the pipe
of the maintenance stand.
Set the handle so that the maintenance
stand can stand upright.
ucqx4p-005
Position of Mower during Maintenance_001
1 Maintenance stand
1.
2.
3.
LM101
Maintenance
Page 5-2
Maintenance Precautions