Baroness LM101, Owner'S Operating Manual, Page: 49 / 88

Cutting Work
Cutting Work
Warning
Do not operate on a steep slope.
Caution
Do not start to move or stop the machine
abruptly.
Caution
Be sure to operate at an appropriate speed for
the mowing site.
For mowing on an undulated surface, mow
with lowered cutting speed.
Important
Be sure to attach the grass catcher.
Discharge the clippings at the right time during
operation.
Remove the traveling tires.
Flip up the stand.
Install the grass catcher.
Move the FOC (High/Low Clip) selector lever
to the desired position.
Move the drum clutch lever to the "ON"
position.
Move the groomer clutch lever to the desired
position.
Move the Unit clutch lever to the "ON"
position.
Start the engine.
Release the brake.
Release the safety lock and grip the main
clutch lever slowly to start mowing.
Note:
The factory default maximum engine rotation
speed is set to 3,100 rpm.
Operate at about 3,000 rpm.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Removing/Installing Traveling Tires
Important
Remove the traveling tires before cutting
work.
Traveling tires are used to travel.
Removing Traveling Tires:
Stop the engine.
Flip down the stand.
1
2
x9pzjh-006
Removing/Installing Traveling Tires_001
1 Stand
2 Traveling tire
While holding the lever of the wheel mount
plate to the release position, pull the
traveling tire toward to remove it.
1
2
x9pzjh-002
Removing/Installing Traveling Tires_002
1 Traveling tire
2 Wheel mount plate
1.
2.
3.
Handling Instructions
LM101
Handling Instructions
Page 4-27
Cutting Work