Baroness LM101, Owner'S Operating Manual, Page: 47 / 88

Note:
Set the lever to the OFF position when
traveling.
FOC (High/Low Clip) Selector Lever
Caution
Operate and set the lever to the proper
position in accordance with the purpose when
the main clutch lever set to the OFF position.
The FOC (High/Low Clip) selector lever is in
the right side of the unit.
There are three changeover positions.
When the lever is shifted to "High clip", the reel
cutter (cutting cylinder) rotates faster, and the
clip pitch (cutting interval) becomes shorter.
This is suitable for the work in good turf
condition.
When the lever is shifted to "Low clip", the reel
cutter (cutting cylinder) rotates slower
compared to "High clip" and the clip pitch
becomes longer.
This is suitable for the work when the turf
condition is not so good.
When the lever is shifted to "Stop", the drive
transmission for the reel rotation gear is
disengaged.
1
B
A
C
el1q3z-002
FOC (High/Low Clip) Selector Lever_001
1 FOC (High/Low clip) Selector Lever
A High clip
B Low clip
C Stop
Engine Clutch Cover
The engine clutch cover is on the left side of
the engine, covering the engine clutch.
The engine clutch cover can be opened and
closed with the fastening bolt taken off and put
on.
1
2
paspfk-003
Engine Clutch Cover_001
1 Engine Clutch Cover
2 Fastening bolt
Handling Instructions
LM101
Handling Instructions
Page 4-25
Operation Method