manualshive.com logo in svg

Baroness LM101, Owner'S Operating Manual, Page: 46 / 88

Share
Download
Baroness LM101 Owner'S Operating Manual Download Page 46

Main Clutch Lever

Caution

Avoid quick operation.
Carefully and slowly operate the machine.

Important

The main clutch is not activated unless the
safety lock released.

The main clutch lever is located in the handle.
Unlock the safety lock and then grip the main
clutch lever to traveling forward with rotating
the reel cutter.
Release the main clutch lever from the hands
to stop the machine traveling and the reel
cutter rotating.

1

2

B

A

k7k67l-004

Main Clutch Lever_001

1

Main clutch lever

2

Clutch lock lever

A

ON

B

OFF

Drum Clutch Lever

Caution

Operate and set the lever to the proper
position in accordance with the purpose when
the main clutch lever set to the OFF position.

The drum clutch lever is located at the rear of
the right frame side.
Set the lever to ON to activate the drum and
the traveling wheels.
Set the lever to OFF for neutral.

1

B

A

dckng4-001

Drum Clutch Lever_001

1

Drum clutch lever

A

ON

B

OFF

Note:
The machine can be moved easily with the
lever OFF when the engine stopped.

Unit Clutch Lever

Caution

Operate and set the lever to the proper
position in accordance with the purpose when
the main clutch lever set to the OFF position.

The unit clutch lever is located above the left
frame.
Set the lever to the ON position and the power
is transmitted from the transmission case to the
unit.
Set the lever to the OFF position and the
power from the transmission case to the unit is
cut off.

1

B

A

xzqhpm-001

Unit Clutch Lever_001

1

Unit clutch lever

A

ON

B

OFF

LM101

Handling Instructions

Page 4-24

Operation Method

Summary of Contents for LM101

























































































Reviews:

No comments