Open the reserve tank cap, and then
supply clean water up to the "FULL"
mark.
1
ouuoov-014
Coolant Supply_002
1
Radiator cap
Oil Cooler
Inspection of Oil Cooler
Make sure that there is no damage to the
oil cooler.
Make sure that the oil cooler is not
contaminated.
Cleaning of Oil Cooler
Important
An unclean oil cooler may cause malfunction
of the hydraulic system.
Important
Do not use solid objects, such as a spatula or
screwdriver, or high-pressure water to clean
the radiator or oil cooler.
Otherwise, special fins or tubes may be
damaged, possibly resulting in reduced
cooling performance or coolant leakage.
If the oil cooler has been contaminated with
dust, be sure to clean it.
After operating the machine in a dusty
environment, it is important to remove dust as
soon as possible.
Open the radiator cover.
[2]
1.
2.
1.
Unlock the rubber catches on the left and
right of the oil cooler, and then tilt the oil
cooler.
3
2
2
1
C30D7599
Cleaning of Oil Cooler_001
1
Oil cooler
2
Rubber catch
3
Radiator
Carefully clean the front and back of the oil
cooler with water or compressed air.
Hydraulic Oil
Inspection of Hydraulic Oil
The oil gauge is on the side of the hydraulic
tank.
Raise the mower decks and maintain that
position on a level surface.
Make sure that the oil level is at the middle
of the oil gauge.
1
olekci-005
Inspection of Hydraulic Oil_001
1
Oil gauge
Check underneath the machine for oil
leakage.
2.
3.
1.
2.
3.
GM2810A
Handling Instructions
Page 5-6
Inspection and Cleaning