Baroness GM2810, Service Manual

Page: 99 / 185

Normal operation is when there is
conduction between relay terminals 5 and 6
and no conduction between relay terminals
3 and 4.
1
8
3 6 4 5
38jyg3-002
Inspection of Power Relay_002
Caution
Do not short-circuit the battery terminals.
Normal operation is when there is no
conduction between 5 and 6 and there is
conduction between relay terminals 3 and 4
with the battery connected to relay
terminals 1 and 8.
18 3 6
4 5
38jyg3-003
Inspection of Power Relay_003
3.
4.
Diff-Lock Switch
An auto-return switch is used, and it is located
below the steering wheel on the right side.
Flip the switch up or down to engage the
differential lock for the front wheels.
When the switch is released, it returns it to its
neutral position and the differential lock is
disengaged.
1
OFF
ON
ON
k3y8px-001
Diff-Lock Switch_001
1 Diff-lock switch
Inspection of Auto Return Switch
Prepare a stand alone switch.
It is normal if the switch terminal 1 and 2
are conducted between them when the
switch lever is pressed towards the terminal
1 side, and if they are not conducted when
the lever is in neutral position.
It is normal if the switch terminal 2 and 3
are conducted between them when the
switch lever is pressed towards the terminal
3 side, and if they are not conducted when
the lever is in neutral position.
1 2 3
4
ET115G
ع
(ON) (ON) OFF
2-3 2-1 -
ࠬࠗ࠶࠴․ᕈ
Switching
function
ᒻฬ
Part No.
ࠠ࡯Ḵ
Key way
ࠠ࡯Ḵ
Key way
ࠠ࡯Ḵ
Key way
ធ⛯┵ሶ
Connecting terminals
915q16-001
Inspection of Auto Return Switch_001
1 Terminal 1
2 Terminal 2
3 Terminal 3
4 Switch lever
1.
2.
3.
Electrical system
GM2810
Electrical system
Page 5-17
Electrical components