Baroness GM2810, Service Manual

Page: 95 / 185

Rocker Switch
Rocker switches are located in the operation
panel and are used for the rotary knife rotation
switch, 4WD switch, DPF auto regeneration
inhibit switch and assist switch.
1
2
3
t3inzb-001
Rocker Switch_001
1 Rocker switch
2 C
3 A
Normal operation is when there is continuity
between sockets A and C with the rocker
switch in the "ON" position and no continuity
between sockets A and C with it in the "OFF"
position.
Rocker switch M
The rocker switch is located in the operation
panel and is used for the DPF parking
regeneration switch.
1
2
3
t3inzb-001
Rocker Switch_001
1 Rocker switch
2 C
3 A
Normal operation is when there is conduction
between sockets A and C when the rocker
switch is pressed to the operation side, and no
conduction between sockets A and C when the
rocker switch is released.
Proximity Sensors
Proximity sensors detect through non-contact
methods that objects are nearby.
ON OFF
1
2
qeetgd-001
Proximity Sensor_001
1 Proximity sensors
2 Object (metal)
If an object is away from the proximity sensor,
the sensor is set to the "ON" position and the
operation indicator lights up in red.
If an object is near the proximity sensor, the
sensor is set to the "OFF" position and the
operation indicator goes off.
Operation indicator:red
Present
Not Present
ON
OFF
ON
OFF
High
Low
Sensing object
Operation indicator
(red)
Control output
(between brown and
black leads)
Output voltage
(between black and
blue leads)
1 2
3
qeetgd-004
Proximity Sensor_002
1 Connector terminal (brown; +)
2 Connector terminal (black; output)
3 Connector terminal (blue;
–
)
Electrical system
GM2810
Electrical system
Page 5-13
Electrical components