Baroness GM1700, Owner'S Operating Manual

Page: 78 / 87

Replacement of Engine Oil Filter
Caution
Be careful with hot oil, which could cause
burns if it contacts your skin.
Important
When replacing the engine oil filter, be sure to
drain the engine oil into a container and
discard it in accordance with local laws and
regulations.
Important
Be sure to use engine oil that is classified as
API Service Grade CF or higher, with an SAE
Viscosity that is appropriate for the operating
environment (ambient temperature).
Important
Securely tighten the oil level gauge and oil
filler cap.
With the filter wrench, remove the old filter
cartridge.
1
5vmf9a-003
Replacement of Engine Oil Filter_001
1 Filter cartridge
Lightly coat the packing of the new filter
cartridge with engine oil.
Hand-tighten the filter cartridge until the
packing contacts the sealing surface, and
then firmly hand-tighten (without using a filter
wrench).
Supply engine oil until it reaches the
specified level.
"Supply of Engine Oil" (Page 4-9)
Start the engine, and then stop it after 10 to
20 minutes.
1.
2.
3.
4.
5.
Make sure that there is no oil leakage at the
sealing surface of the filter cartridge.
Check the engine oil level.
If it is low, supply engine oil until it reaches
the specified level.
Replacement of Fuel Filter Element
If dust or dirt accumulates in the fuel filter, the
fuel flow will become insufficient.
Replace the fuel filter at the appropriate times.
The fuel filter is on the right side under the
hood.
Close the fuel cock of the fuel filter.
1
A
B
zihgka-003
Replacement of Fuel Filter Element_001
1 Fuel filter
A ON (open)
B OFF (close)
Remove the ring nut, and then remove the
cup.
1
2
3
4
zihgka-001
Replacement of Fuel Filter Element_002
6.
7.
1.
2.
GM1700
Maintenance
Page 5-20
Maintenance Work