Baroness GM1700, Owner'S Operating Manual

Page: 55 / 87

Oil Pressure Lamp
The oil pressure lamp is the right pilot lamp
located in the operation panel.
It turns on when the ignition key is set to the
"ON" position before the engine starts. It turns
off when the engine starts and engine oil
pressure is generated properly.
If this lamp illuminates while you are operating
the machine, stop the engine immediately,
and then inspect the machine and perform
any necessary maintenance.
1
1ldikn-002
Oil Pressure Lamp_001
1 Oil pressure lamp
Angle Meter
The angle meter is located in the operation
panel.
This instrument indicates the angle of the
machine position.
1
al3bhj-001
Angle Meter_001
1 Angle meter
Move
Traveling Procedure
Caution
Under any circumstances drive the machine at
such a speed that you can stop it immediately
for emergencies.
Important
Do NOT start to move or stop the machine
abruptly.
It will damage the hydraulic system or result in
oil leakage.
Start the engine.
"Procedure to Start Engine" (Page 4-16)
Raise the mower decks.
Depress the brake pedal to release the
parking brake.
Slowly depress the traveling pedal.
The machine starts traveling.
Release the traveling pedal and depress the
brake pedal to stop the machine. 1.
2.
3.
4.
5.
6.
Handling Instructions
GM1700
Handling Instructions
Page 4-27
Move