Baroness GM1700, Owner'S Operating Manual

Page: 31 / 87

1 Hood
2 Rubber catch
3 Intake
4 Bolt
5 Nut
Radiator
Inspection of Radiator
Make sure that there is no damage to the
radiator.
Make sure that the radiator is not
contaminated.
Cleaning of Radiator
Important
An unclean radiator may cause overheating or
damage to the engine.
It may also cause malfunction of the hydraulic
system.
Important
While cleaning, do not allow water or dust to
enter the air intake.
This may cause damage to the engine.
Important
Do not use solid objects, such as a spatula or
screwdriver, or high-pressure water to clean
the radiator or oil cooler.
Otherwise, special fins or tubes may be
damaged, possibly resulting in reduced
cooling performance or coolant leakage.
If the radiator has been contaminated with
dust, be sure to clean it.
After operating the machine in a dusty
environment, it is important to remove dust as
soon as possible.
Open the hood.
1.
2.
1.
Pull the dust screen up to remove it.
1
2
3
4
va4j43-003
Cleaning of Radiator_001
1 Hood
2 Dust screen
3 Radiator
4 Air intake
Carefully clean the front and back of the
dust screen and radiator with water or
compressed air.
Coolant
Inspection of Coolant
Caution
Do not touch the radiator or coolant during
engine operation or immediately after the
engine has been turned off.
Otherwise, you may get burned.
Caution
Inspection should take place after the engine
has well cooled down.
Make sure that the coolant level in the
reserve tank is between "FULL" and
"LOW.
”
FULL
LOW
1
ckvlsx-001
Inspection of Coolant_001
1 Reserve tank
2.
3.
1.
Handling Instructions
GM1700
Handling Instructions
Page 4-3
Inspections