Barko HARVESTER 240B, Operator'S Manual

Page: 87 / 174

40-5
®
HARVESTER SIDE CONSOLE
1 HARVESTER SIDE CONSOLE ILLUSTRATION & FUNCTIONS
Fig-1 illustrates the typical layout and locations of components, control switches and buttons, and
ports on a BARKO Harvester.
(5) IQAN
MD4 DISPLAY
CUP HOLDER
(6)
RADIO
MONITOR
RAM MOUNT
CELL PHONE
RAM MOUNT
(1) EMERGENCY
STOP BUTTON
(4) SEAT
HEATER
(3) HEAD ARMING
(2) CONTROL POWER
HEATER-A/C
CONTROL
HARVESTER
KEY PAD
IGNITION SWITCH
12V POWER
(X2)
LIGHTS
SCREEN
PROGRAMING
PORT
ENGINE
DIAGNOSTIC
PORT
Fig-1
EMERGENCY STOP BUTTON- In the event of an emergency or an issue with the machine that
requires an immediate stop of all functions, push the stop button. Once the switch is pushed down, the
engine and all functions will shut down. When the machine is ready to be restarted, pull the switch to
the outer position while twisting the knob as the arrows on the knob suggests.
NOTE: The door will need to be closed, armrest down and cab bolts in place in order to activate the
machine control power (system enable) switch. The IQAN display will show if the system is enabled.
CONTROL POWER SWITCH- Activates the control system (IQAN) of the machine. No functions of the
machine will work until this switch is activated.
2.
1.
08/20/2018
Updated
OPERATOR’S