Barko HARVESTER 240B, Operator'S Manual

Page: 57 / 174

13-35
®
CONTROL FUNCTIONS- HARVESTER
This manual is applicable to factory installed machine functions and
controls. It does not take into account any changes or modifications made after
shipment. Verify all control functions before operating this machine.
Because BARKO offers so many different attachment options, it is not
possible to have a specific layout for every configuration. If the controls you
require are different than what is shown, contact your authorized BARKO dealer for
assistance .
Any alterations of the controls or wiring can cause severe electrical damage
and will become the sole responsibility of the machine owner. Machine
controls can only be changed by an authorized BARKO technician with special
instructions from the factory.
The machine functions can be changed to the other joystick or joystick
handle through the settings within the machine display. The current
configuration can be displayed at any time on the machine display. See the section
on display images in Chapter 40 Cab for how to access the current control
configuration.
1 COMPONENTS AND TYPICAL CONTROL FUNCTIONS
All operational functions of this BARKO machine are controlled with Joysticks and Foot Pedals.
The more travel applied to the joystick and foot pedal movements, the faster the function of the
controlled machine component.
WARNING
!
NOTICE
NOTICE
DANGER
!
JOYSTICK FOOT PEDAL
Ÿ
4-directional movements (forward, back
and side to side) of the joysticks typically
control the boom, machine swing, and
rotation or tilt of the attachment
Ÿ
Bottons on the joystick typically control
functions of the attachment.
Ÿ
Up and down “lever” movement of the
foot pedals typically control the tracks
and movement of the entire machine.
Push Buttons
Heel
Toe
Foreward
Back
Right
Left
06/03/2019
Updated
OPERATOR’S