Barko 295B, Operator'S Manual

Page: 9 / 96

10-5
®
INTRODUCTION
EMAIL: Parts@barko.com
1. Right Hand (RH) or Left Hand (LH)
Know the following information before ordering parts or servicing your BARKO machine:
Model and Serial Numbers are found on the Data Plate of your machine and/or
All parts for your BARKO machine or attachment may be ordered from your nearest BARKO
Dealer. If you are not certain of the dealer's location check our website or contact BARKO Customer
Service for assistance:
PHONE: 715-395-6700
Understand the correct servicing procedures before servicing your BARKO machine or
attachment. It is important to know the correct operating and servicing procedures of the machine and
all safety precautions to prevent the possibility of property damage and/or personal injury or death.
REFER TO A BARKO SERVICE MANUAL for detailed service schedules and procedures.
Your BARKO machine has been designed and manufactured with the highest quality of
materials and care in workmanship. This Operator’s Manual is intended to assist you in safe
operation and maintaining your BARKO to keep it in peak condition. A BARKO Operator’s Manual must
be with the machine at all times. Separate Parts and Service Manuals can be obtained from your
BARKO Dealer.
WEB: www.barko.com/dealer-locator
Right or left hand is determined when positioned in the machine from the normal
operator's seat position behind the boom or lifting arms.
Cylinders- The port location off center viewed from butt of cylinder.
Pump and Motor Rotation-
Determined by viewing from the shaft end.
2. Model and Serial Numbers ---- IMPORTANT!
attachment. Machines and Attachments each have their own unique S/N's. Locations of the
data plate on popular BARKO models are:
240/260/270
On head right side of main lift cylinder
612/830/930/937 LH rear of front frame
70/80/110 LH, RH or rear of the head plate
295/495/595 RH on lower frame below platform
Grapples- Front or side head plate
Cylinders- ID numbers stamped on gland.
It is your responsibility to know and understand the factory warranty for your BARKO
machine or attachment. BARKO warranties are included with the Operators manual and
may be machine/serial number specific.
4. Safe Working Practices & Procedures
It is your responsibility to know and understand ALL safety warnings and follow safe
3. Warranty
service procedures in this manual before servicing your BARKO machine or attachment.
PART NO 539-00667
07/12/2018
Updated
OPERATOR’S