page 100
page 100
page 100
page 100
page 100
160B&C TM
800-00140
Figure 1
Figure 1
Figure 1
Figure 1
Figure 1
TOOLS REQUIRED FOR SERVICING
TOOLS REQUIRED FOR SERVICING
TOOLS REQUIRED FOR SERVICING
TOOLS REQUIRED FOR SERVICING
TOOLS REQUIRED FOR SERVICING
Socket Set.
0.15" screwdriver.
0.08" screwdriver.
3.5 mm screw tap (shortened).
Torx spanner, type T30.
Main holding tool (horse shoe). - can be ordered.
Holding tool for bushing. - can be ordered.
Bushing for 1-1/4" DIA. - can be ordered.
DISASSEMBLY
DISASSEMBLY
DISASSEMBLY
DISASSEMBLY
DISASSEMBLY
(REFER TO FIGURE 1)
(REFER TO FIGURE 1)
(REFER TO FIGURE 1)
(REFER TO FIGURE 1)
(REFER TO FIGURE 1)
1. Remove parallel key (item 8) from non-splined shaft, if used.
2. Put motor in main holding tool, with output shaft lowest and remove the two seal plugs (items 13).
3. Using a 9/16" hexagon socket, remove drain plug (item 22).
SWING MOTOR MAINTENANCE
SWING MOTOR MAINTENANCE
SWING MOTOR MAINTENANCE
SWING MOTOR MAINTENANCE
SWING MOTOR MAINTENANCE
