background image

CARE & MAINTENANCE ADVICE

ASSEMBLY INSTRUCTIONS

10

Please read the below Care & Maintenance tips to help 

protect your garden table:

• To prolong the life of the tabletop we recommend you always use place mats and 
coasters when putting glasses and plates onto the glass.

• Keep your table away from external extreme heat sources.

• We recommend you always use heat mats when placing hot objects on the 
tabletop.

• Be careful not to drop any objects onto the table as this could damage the tabletop.

• We always recommend two people to lift the glass.

• The table is fitted with plastic feet for protection. Never drag the table as this will 
accelerate wear and tear on the feet, which is not covered under warranty.

• We recommend cleaning the table with warm, soapy water. You can use a cloth or 
a soft-bristle brush with gentle pressure. Never use abrasive cloths or detergents to 
clean the glass. Once you have finished, wash off any residue with clean water.

• For optimum glass and rattan protection we recommend a protective cover is used 
all year round.

• We recommend clearing any spills quickly when exposed to direct sunlight. Any 
clear liquid on the glass will work as a magnifier, the temperature of the sun’s 
rays will increase creating an extremely hot heat source which could damage the 
rattan. The same applies to leaving a filled drinks glass on the glass tabletop for an 
extended period.

Summary of Contents for TIVERTON T1VEDINIBULK













Reviews: