INSTRUCTION MANUAL
DPS400
56-101-01180-C
INTRO
Page
1
November 5, 2003
INTRODUCTION
1. PUBLICATION BREAKDOWN
This instruction manual establishes the standards of operation for the Barfield Digital Pitot
Static Test Set and has been prepared using ATA Specification 101 as a guide.
Questions related to this manual should be submitted in writing to:
Barfield
P.O. Box 025367
Miami, FL 33102-5367
USA
Attn: Technical Customer Support - GSTE
Inquiries should be specific and refer to the publication title, number, chapter, page, figure,
paragraph, and effective date.
Changes, when approved, will be published as revisions to the basic publication
2. IDENTIFICATION - MODIFICATION STATUS
A. The identification label, (Figure 1), located on the front bulkhead of the Test Set, provides
the following information:
Manufacturers'
Name
Equipment
Modification
Designation
of
Equipment Equipment
Options
Equipment
Part
Number
Equipment
Model
Number
Equipment
Description Equipment
Serial
Number
IDENTIFICATION LABEL
Figure 1
B. In addition to the identification label, there are three (3) other record forms packaged with
the test set as follows: