56-101-01501_01502 Revision D
Page | 5
CHAPTER 3: INSTALLATION
1. ASSEMBLY
A.
Package
Carefully unpack the test set and make a visual inspection of the tester for evidence of
damage that might have occurred during shipping. The user should take inventory of the
package contents to insure the following items are there:
(1) DFQ40K Fuel Quantity Test Set
(2) Standard Accessory Lead Package P/N 101-01511
(3) Instruction Manual P/N 56-101-01501_1502 (this doc)
(4) Six (6) each Alkaline C Cell (LR14) Batteries
(5) 28VDC Power Cable P/N 175-00252 (P/N 101-01502 only)
B.
Enclosure
The test set is encased in a Copolymer injection molded case comprised of upper and lower
sections and is depicted in Figure 4:
(1) The lower section of the case supports the panel assembly.
(2) The upper section is a lid.
(3) The case is equipped with a Storage Pouch mounted on the left side.
(4) The interior of the case has a conductive spray applied to reduce EMC.
(5) Height: 6.0 in (15.2 cm)
(6) Width:
13.4 in (34.0 cm)
(7) Depth:
11.6 in (29.5 cm)
(8) Weight: 10.0 lbs (4.5 kg)
Figure 4
Case Dimensions