Bardiani Valvole BBZS5, Instruction, Use And Maintenance Manual

Page: 9 / 54

3 Technical Data
EN-IST-BBZS5-0420
3 Technical Data
VALVE DATA
Maximum pressure 10 bar
Minimum pressure Vacuum
Storage temperature from -10°C to 25°C
Material in contact with the product AISI 316L (1.4404). Check the resistance to corrosion in
relation to products and detergents
Gasket material in contact with the
product EPDM, FKM, HNBR, PTFE. and other gaskets on request.
Check compatibility with products and detergents
Surface finish in contact with the
product Ra 0.8 µm. Other finishes available on request
VAPOUR BARRIER DATA
Connectors 1/8” BSP
Steam maximum temperature 130°C
Gaskets material FKM
PNEUMATIC ACTUATOR DATA
Connectors 1/8" (BSP) for 6x4mm pipe
Air pressure From 6 bar to 8 bar
Material AISI 340L
Gaskets material NBR
GASKET MATERIALS COMPATIBILITY
Product EPDM FKM HNBR MVQ
Temperature (applications with air)
from -10°C to
+140°C from -10°C to
+200°C from -10°C to
+130°C from -70°C to
+230°C
Caustic soda 2% 60°C 30°C To be checked Unsuitable
Nitric Acid 2% 60°C 80°C To be checked Unsuitable
Saturated steam 125°C Suitable To be
checked Suitable Unsuitable
Greases Unsuitable Suitable Suitable Unsuitable
Alcohols Suitable Unsuitable Suitable Suitable
The valve complies with PED 2014/68/EU directive, with special reference to Annex III, Module A,
concerning internal manufacturing checks as indicated in the Conformity Assessment Procedures.
Valves with DN equal or smaller than DN25 are not included in compliance with Article 4, paragraph 3.
Valves designed for use with gases, liquefied gases, gases dissolved under pressure, vapours and also those liquids
whose vapour pressure at the maximum allowable temperature is greater than 0,5 bar above normal atmospheric
pressure (1 013 mbar) are included within the following limits:
- valves with DN between DN32 and DN100 (included) with group 1 fluids;
- valves with DN125 or bigger with group 2 fluids.
In the event of any doubt, please contact Bardiani Valvole S.p.A.
9