Barco XLM H25, Owner'S Manual

Page: 37 / 111

3. Connections
2 1
3
PUSH
2 1
3
PUSH
COLOR CONTRAST PHASE
SHARPN TINT
BRIGHTN
STANDBY
ENTER
TEXT
EXIT
PAUSE
2 1
4 3
5 6
8
0 9
7
OK
IR
GREEN : OPERATIONAL
RED : STAND-BY
Image 3-21
Hardwired RCU
1
2
A B C
D
2
3
1
Image 3-22
Stereo jack pin configuration
A tip : left channel
B ring : right channel
C screen : common (GND)
D external switch
1
Stereo jack
2 Mono jack
The Remote connection uses a standard two wire cable terminated on each end with a 3.5 mm male
(mono/stereo) phone jack.
This cable is not delivered but is available in most electronic or audio shops.
3.4.4 Bi-directional communication port, CTRL 3
What can be connected
The rugged remote control can be connected to the Bi-directional communication port CTRL 3.
With this rugged remote control all control functions can be taken over. The LCD panel on this rugged remote displays the same
information as the panel on the projector itself.
Pin assignment two way connector
1 2
3
Image 3-23
R5976690 XLM H25 03/09/2004 33