Barco XDX Series, Installation Manual

Page: 66 / 90

R5914481 /02 XDX 66
Item
Setting
IP address 192.168.100.2
Subnet mask 255.255.255.0
Default gateway 192.168.100.1
Default hostname [projector model] - [serial number]
How to connect?
1. On the touch display of the projector, press either About , or Settings to see the IP address assigned to the
projector.
2. Use a web browser to browse to the assigned IP address.
The login page of Web Communicator will be displayed.
3. Log in onto Web Communicator.
Default passwords Web Communicator
When logging in for the first time, use one of the following default passwords
User group
User name
projector
Default password
User name ICMP
Default password
Administrator admin Admin1234 admin Admin1234
Service technician st Service1234
Show manager show Show1234 show Show1234
Projectionist proj Proj1234
For security reasons, it is advised to change these passwords as soon as possible after your
projector has been configured.
6.4 Switching the projector OFF
Putting the projector in ECO mode is thé preferred method of shutting down the projector after a day
of playing. Only switch the projector to OFF if technical problems have occurred.
Take into account that you can
not start the projector remotely when the projector has been
switched OFF. You can only power it using the power button.
How to put the projector in ECO mode, using the touch display?
1. In the main menu of the touch display, press on the ECO button.
Image 6–6
2. In the Eco menu, press “Switch to ECO mode”. Press for more than one second.
Starting the projector for the first time