Barco XDL, Installation Manual

Page: 23 / 88

23 R5906150 /05 XDL
Component location
5
12
4
3
2
7
8
9
10
11
6
1
Image 2 – 3
1 Input & Communication interface
2 Beam stop button
3 Beam enable key
4 UPS sockets
5 Cover mains compartment
6 Valve coupling to connect with external chiller(s)
7 Air inlet filter
8 Communication port with chillers.
9 Lens
10 Air outlet
11 Laser status light
12 Projector ID label
Air flow
The XDL series projector has two air flow channels (reference A & B) to cool the projector electronics. The air
intake is at the front side of the projector, the air outlet is at the back.
A
B
A
A
B
Image 2 – 4
2.2 Chillers and hoses
DMD
A digital micromirror device, or DMD, is an optical semiconductor that is the core of DLP projection
technology.
Introduction
The chillers are specially designed for the XDL projector. The chillers are controlled by the projector and
ensure that the ambient temperature of the lasers and DMDs is within specs. Without these chillers the
projector will not operate.
Depending on the projector model one or two chillers are required! For the XDL-4K30 series projector one
chiller has to be installed. The XDL-4K60/75 series needs two chillers.
System overview