3. Input & Communication
2
Image 3-8
Status overview
The Laser Status light has only one color: white. The combination of the Laser Status light and the backlight of the Light button on
the Local Keypad indicates a certain condition of the projector. See table below.
Status light
Power On/Off button
Meaning
Off
Off, blinking white,
blinking blue or
continuous white
Sealed compartments are DECONDITIONED. Lasers are not activated. It
is safe for service personnel to open the compartments.
Blinking
(6 seconds)
Blinking blue
Indicates the start of the CONDITIONING process.
After six seconds the status light will light up continuously.
Blinking blue
Ongoing CONDITIONING process. Lasers are tested
Continuous blue
Sealed compartments are fully CONDITIONED. Lasers are activated for
image projection.
On
Blinking white
Ongoing DECONDITIONING process. Lasers can be active on low power.
Slow blinking
Continuous white
or red
Not safe to open the sealed compartments due to risk of condensation.
The external dew point of the booth area is too high.
Wait until the status light turns of and remains off.
28
R5906151 XDL 17/04/2018
Summary of Contents for XDL-4K75
