Barco X Series, Installation Manual

Page: 20 / 84

4. Components of the X-series display
4.1 X-series tile
Introduction to the X-series tile
Each corner of The X-series tile has pins and studs that precisely fi t the separate connection plates used to connect to the surround-
ing tiles. This allows for effortless alignment and fastening of the tile into a LED wall.
3
1
2
Image 4-1
1
Connection box
2 Alignment pin (8x)
3 Stud for mounting (4x)
Data link cables
A SFP+ cable with a length of 1 meter ( R9801395B10 ) is used to connect the data ports between two tiles.
To connect the fi rst tile with the In fi nipix™ output , optical cables are used.
Image 4-2
SFP+ cable 1m (Ordering number for 10 pieces:
R9801395B10 )
Power cable
This power cable is used to connect the power plugs between two tiles..
Image 4-3
Power cable (
Z3403117 )
Power spider cable
Barco has made a power spider cable which splits up the power circuit into several power branches.
16 R5906024 X-SERIES 15/03/2016