![background image](http://html.mh-extra.com/html/barco/wodan/wodan_user-manual_474394056.webp)
7. Advanced operations
7.3
Con
fi
guring the lens, zoom-focus
What can be done?
Once a lens has been installed in the projector, you can
fi
ne-tune the projected image.
Zoom - Focus
1. In the main menu, select
Installation
→
Lens
→
Zoom focus
.
Image 7-8
Lens menu, Focus & Zoom
2. Use the
▲
or
▼
key to zoom the lens in or out.
Use the
◄
or
►
key to focus the lens to far or near.
Image 7-9
Zoom and focus adjustment
7.4
Con
fi
guring the lens, shift
What can be done?
The image can be shifted by using the vertical and horizontal lens shift.
Lens shift is only possible when lens shift is calibrated. Please refer to the lens calibration section in
System
Settings
→
Lens Calibration
menu.
Vertical and Horizontal Shift
1. To change the position of the projected image, select
Installation
→
Lens
→
Shift
.
Image 7-10
Lens menu, Lens shift
2. Use the
▲
or
▼
key to shift the lens (image) in vertical direction.
Use the
◄
or
►
key to shift the lens (image) in horizontal direction.
52
R5906102 WODAN 10/04/2018