![background image](http://html1.mh-extra.com/html/barco/wepresent-wipg-1000/wepresent-wipg-1000_user-manual_3834146011.webp)
2. Hardware Installation
2. HARDWARE INSTALLATION
2.1
Installing the Hardware
Hardware Installation
1. Connect the WiPG-1000 to the projector/display through the VGA/HDMI port and turn on the projector/display power.
Image 2-1
VGA/HDMI Connection
1
Projector
2
WiPG-1000
3
VGA/HDMI cable
2. Connect the power adapter to the WiPG-1000 and press the power button to turn on the device. The system is ready when the
LED indicator turns Green.
The default standby screen is displayed when the system is ready.
Image 2-2
Default Standby Screen
1
IP Address
2
SSID/Hostname
3
Login Code
3. If WiFi is disabled on the WiPG-1000, the device must be connected to an existing IT network through an Ethernet cable.
4. Connect the speaker to the WiPG-1000 audio jack for audio output. (A speaker is required for audio output when using VGA.)
R5906158 WEPRESENT WIPG-1000 31/01/2018
7
Summary of Contents for WePresent WiPG-1000
