Barco VRWF-3200, System Installation Manual

Page: 24 / 71

5. Mechanical Installation
Dimension Type Value/Range
Screen height fixed 1952
Screen width fixed 3352
Assembly height with respect to bottom image fixed 1529
PD : Projection distance fixed 4674
h : Image’s (screen) start position
variable
-
x : Ceiling mount’s height position variable 241< x >1078
W
ARNING
:
To prevent personal injury always respect the maximum value (1078 mm) and minimum value
(241) for the screwed rods !
5.2.1 Ceiling mount installation
Mounting gauge
A mounting plate or gauge is delivered and will allow to position the 2 ceiling mounts with respect to each other. This plate allows
to determine the position of the center of the 2 ceiling mounts (and thus the center of the assembly) and to point out the position of
the mounting holes of the ceiling mounts.
Center position
of the assembly
Image 5-4
view of the gauge plate
Image 5-5
The gauge plate helps to position the center of the assembly and the mounting holes (indicated
with arrows).
5.2.2 Installing the ceiling mount (top parts of the ceiling mounts)
Take the necessary precautions to mount the assembly (thus the ceiling mounts) at the right position (parallel
to the screen ,... ), this will guarantee proper image alignment and will prevent from having too many extra
adjustments.
How to determine the position of the ceiling mount fixation holes?
The position of the ceiling mount fixation holes can be determined by following drawing.
18 R5976989 BARCO VR WORKROOM 22/09/2006