![background image](http://html1.mh-extra.com/html/barco/ust/ust_installation-manual_3867200015.webp)
R5912118 /01
UST lens for F-series
15
Image 2-6: Mount 3th plate
9.
Place the clamping bracket on the lens so that the fixation holes matches the holes in the support.
Drive in both fixation screws. If necessary, move the 3th plate a little bit until it fully match with the lens.
Fully secure both screws.
Image 2-7: Mount clamp bracket
10.
Fully fasten the screws of the 3th plate and the nuts of the 2nd plate so that the support is fully assembled.
The projector is ready for use.
2.3 Mounting the UST lens on a F70 projector
How to mount
1.
Turn the projector on its side or on its top cover.
2.
Place the bottom support plate on the bottom plate of the projector. Make sure that the fixation holes match
the holes in the bottom plate.