Barco ULTRA REALITY 7000, Owner'S Manual

Page: 49 / 99

7. Image Menu
7.1.5 Sharpness
How to change the sharpness ?
1. Press MENU to activate the Toolbar
2. Press → to select the
Image
item
3. Press ↓ to Pull down the
Image
menu
4. Use ↑ or ↓ to select
settings
5. Press → to pull down the menu
6. Use ↓ or ↑ to select
sharpness
7. Press ENTER
On the screen appears now a sliderbox
8. Use ← or → , the numeric keys on the remote, or the keypad to change the sharpness
7.1.6 Gamma
How to change the Gamma
1. Press MENU to activate the Toolbar
2. Press → to select the
Image
item
3. Press ↓ to Pull down the
Image
menu
4. Use ↑ or ↓ to select
settings
5. Press → to pull down the menu
6. Use ↓ or ↑ to select
Gamma
7. Press ENTER
On the screen appears now a sliderbox
8. Use ← or → , the numeric keys on the remote, or the keypad to change the Gamma
7.1.7 Phase
How to change the Phase ?
1. Press MENU to activate the Toolbar
2. Press → to select the
Image
item
3. Press ↓ to Pull down the
Image
menu
4. Use ↑ or ↓ to select
settings
5. Press → to pull down the menu
6. Use ↓ or ↑ to select
Phase
7. Press ENTER
On the screen appears now a sliderbox
8. Use ← or → , the numeric keys on the remote, or the keypad to change the Phase
7.2 Aspect ratio
What can be done ?
The aspect ratio setting forces the projector to project an image using a defined aspect ratio
• 4:3
• 16:9
• 5:4
• Auto
The Auto function calculates an aspect ratio based on the information stored in the image files.
R5976455 BARCO ULTRA REALITY 7000 30062003 45