![background image](http://html1.mh-extra.com/html/barco/udx/udx_user-manual_4261153025.webp)
25
R5906112 /15
UDX
Image 2–3
Projector Infra Red receivers and Remote Control Unit
The projector has three Infra Red receivers: one at the rear (next to the power input), one at the front (below
the lens holder) and one at the right side (integrated in the Input & Communication module).
Point the Remote Control Unit (RCU) directly to the Infra Red (IR) receiver. Make sure you are within the
effective operating distance (30 m, 100 ft in a straight line)
The RCU will not function properly if strong light strikes the IR sensor window or if there are obstacles
between the RCU and the IR sensor.
45°
45°
45°
45°
45°
45°
Image 2–4
For detailed info about the RCU see chapter
“Pulse Remote Control Unit”, page 31
.
2.2 Power on projector
How to power on
1.
Press the mains switch at the side of the projector to switch on this projector.
Summary of Contents for UDX
