![background image](http://html1.mh-extra.com/html/barco/udx-series/udx-series_user-manual_4260793057.webp)
R5906112 /09
UDX series
57
3.9 Removal of an input board
WARNING:
The procedures below may only be performed by Barco trained and qualified
technicians.
CAUTION:
Always wear a wrist band which is connected to the ground while handling the
electrostatic discharge (ESD) sensitive parts.
The procedure below is applicable to all the input modules of the Input & Communication Unit of the
projector.
How to remove
1.
Switch off the projector and unplug the power cord at the projector back side.
2.
Release the 3 captive screws of the input module (4).
4
4
4
Image 3-15
3.
Pull out the input module of the Input & Communication using the handles.
Summary of Contents for UDX Series
