manualshive.com logo in svg

Barco UDM, Installation Manual, Page: 43 / 106

Share
Download
Barco UDM Installation Manual Download Page 43

43

R5911438 /09

UDM

3.9 Download Projector Toolset

About Projector Toolset

Projector Toolset is a software tool to set up, configure, manage and control Barco projectors.

The Projector Toolset software works with configurations that can be loaded. Several configurations can be
controlled simultaneously. Even when the configurations are connected via different ways.

Projector Toolset is a standalone application that runs on a Java Virtual Machine and that does not require
extra services to run.

Projector Toolset is only available in a download version, no CD can be ordered.

Where to find the download file(s)

The program and all necessary plug-ins, as well as the Reference manual can be downloaded for free from
my.barco.com. Registration is necessary.

1. Go to the Barco website

www.barco.com

.

2. On the home page, click on

myBarco log in

.

3. On the Sign In page, enter your Email address and your password to login.

If you are not yet registered click on

New to myBarco?

and follow the instructions. With the created login

and password, it is possible to enter the Partner zone of Barco.
When your login is correct, the Partner zone is free accessible.

4. In the search field, enter Projector Toolset and click on the search icon.
5. Select

Technical Downloads

.

6. Click on Application Software and download the Projector Toolset software package, which includes the

device plug-in updates.

When downloading the complete Projector Toolset, this software contains already the latest device plug-ins.
When you already have the latest core version of Projector Toolset, it is possible to download only device plug-
in updates from the same web site location.

As Projector Toolset is a stand alone application, it is not necessary to install any other software. A Java virtual
machine is included with this download.

To download the reference manual, select Reference Guide and download the latest version of the manual for
your projector.

Installation

Download first the reference manual and follow the installation instructions as written in this manual.

Prepare to install

Summary of Contents for UDM











































































































Reviews:

No comments