Barco UDM Series, User Manual

Page: 83 / 190

R5911443 /02 UDM 83
Image 8-19: Warp Menu, Screen Size
The Screen Size menu is displayed.
Image 8-20: Screen size
2. Select either Screen width or Screen height .
3. Set the new value to shrink either the width or height of the warp outline so that the outline is equal with the
active source.
Tip: A red border will be projected along with the current image. The border is a visual tool, showing
the result of the adjusted outline.
Tip: The value can also be entered by the numeric keys on the remote control. Press * to delete
existing numbers, and enter the new value by the numeric keys.
4. Click Apply .
8.7.3 Warping – 4 corners adjustment
About 4 Corners adjustment
4 corner adjustment is typically used when the mechanical installation of the projector prevents it from pointing
perpendicularly at the screen. For example, you can overshoot the screen and use 4 corner adjustment to pull
your projected image corners back into the screen.
Some examples:
GUI – Installation