Barco UDM Series, User Manual

Page: 35 / 190

R5911443 /02 UDM 35
3.5 Functionality overview
Remote Control Unit buttons
1
2
3
4
5
6
7
8
9
10
11
12
15
24
23
22
21
20
19
18
17
16
13
14
26 25
Image 3-7
1
Button pressed indicator
2
Shutter open
3
Shutter close
4
LCD panel on / off
5
Project OSD on / off
6
Lens zoom
7
Lens shift
8
Menu open / close
9
Menu selection, OK button
10
Menu navigation
11
Input selection
12
Address button
13
Numeric buttons
14
Backspace (while entering values)
15
XLR connector
16
Decimal mark (while entering values)
17
Macro button
18
Menu back
19
Default value button
20
Lens focus
21
RGB filter
22
Test patterns
23
Power on
24
Power off
25
3.5 mm jack
26
RCU on / off
3.6 Functions of the “ button pressed indicator ”
Functions button pressed indicator
• Rapidly flashes when commands are sent, this is the normal “ button pressed ” indication.
• 1 Short flash when remote control is switched ON by means of the on/off button.
• Continuously lit (up to 5 seconds) when address digits are expected after pressing the ADDR button.
• Slowly flashes (2 times a second) when the battery level is becoming low; typically when more than 85% of
the useful life is past.
Pulse Remote Control Unit