![background image](http://html2.mh-extra.com/html/barco/udm-series/udm-series_user-manual_4255393029.webp)
R5911443 /02
UDM
29
P
P
Image 2-14
The
Test pattern
menu opens on the LCD display.
2.
Use the arrow keys to select the desired test pattern.
2.4 Switching to standby
How to switch to standby
1.
Press and hold the
Power on/off
button for 3 seconds on the local keypad, or press the
Power Off
button on
the remote control.
The projector goes to standby mode. The after-cooling cycle will start (about 30 seconds). During this period
the Power on/off button will blink. Once the after-cooling cycle has ended, the projector will be in standby
mode and the Power on/off button will be lit WHITE.
3 s
30 s
Image 2-15
2.5 Power off projector
CAUTION:
This procedure assumes the projector is in
standby
mode.
How to power off
1.
Switch off the projector with the mains switch. '0' must be pressed.
Summary of Contents for UDM Series
