Barco UDM Series, User Manual

Page: 133 / 190

R5911443 /02 UDM 133
10.15 Electronic Convergence
What can be done?
The convergence patterns can be used to check the convergence alignment of red, green and blue. If there is
a misalignment of at least one 1 pixel, an electronic realignment is possible.
Mechanical realignment of the convergence can only be done by a qualified service technician.
How to display the convergence settings
1. In the main menu, navigate to System Settings → Maintenance → Electronic Convergence .
Image 10-39: Maintenance menu, Electronic Convergence
The Electronic Convergence menu is displayed.
Image 10-40
2. Select the desired X or Y value for one of the three colors and confirm.
3. Use the arrow keys to raise or lower the value and confirm.
4. Confirm all changes by pressing Apply .
Image 10-41
GUI – System Settings