![background image](http://html1.mh-extra.com/html/barco/udm-series/udm-series_installation-manual_4258230083.webp)
83
R5911438 /08
UDM
7.4 Use case 4: Loop-through mode
Loop-through mode
1
6
4
3
2
5
Image 7–4
1
SFP input board
2
Neutrik OpticalCon Duo
3
Neutrik OpticalCon Quad
4
Internal fiber cable
5
SFP+ fiber transceiver
6
Advanced Quad cable
Barco delivers only the SFP input and SFP+ fiber transceivers. The customer has to buy the SFP+
transceiver and the optional breakout adapter or the fiber integrated cable.
How to configure the SFP input
1.
Remove both plates covering the access to a Neutrik connector locations.
2.
Mount the Neutrik OpticalCon Quad connector and the Neutrik OpticalCon Duo.
3.
Remove the plate covering the access to the SFP cage and insert the SFP+ transceivers.
4.
Re-install the cover plate.
5.
Mount the fiber internal cables between the Neutrik OpticalCon Quad and the SFP+ transceivers.
6.
Mount the fiber internal cables between the Neutrik OpticalCon Quad and the Neutrik OpticalCon Duo.
7.
Install the SFP input in its slot of the Input & Communication module. See procedure
.
Summary of Contents for UDM Series
