![background image](http://html1.mh-extra.com/html/barco/transform-a/transform-a_service-manual_3828475059.webp)
Barco – TransForm A – DOC-3358-2 – service manual – Revision 06 – March 2007
_________________________________________________________________________
4-21
4.5
Required firmware versions
4.5.1
CPU board of OmniBus A18
If UGX
G
RAPHIC
C
ARDS
are used in an O
MNI
B
US
A18, then the firmware of the CPU board must be version
PCX-3153-
03
or higher. To check the firmware version take a look at the label at the side of the CPU board. The printing on
the label looks like this or similar:
XXXXXXXXXXX
X 0.0 X
X 3153-03 X
X PCX X
XXXXXXXXXXX
If the firmware is a former release, then it must be upgraded. Please contact the Barco support, see section