Barco TransForm A, Service Manual

Page: 14 / 61

Barco – TransForm A – DOC-3358-2 – service manual – Revision 06 – March 2007
__________________________________________________________________________
2-3
2.1.2 The back of the Processor
P
ROCESSOR
with standard power supply (left) and detail of a P
ROCESSOR
with redundant power supply (right):
25
18 19 20
29 28 26 27 30 31 32 33 34
14 21-24 15 16 17 14 14
35 35 35 36 36
25 25 14
29 28 26 27 31 32a 32b
14 air supply
15 genlock loop through in
16 remote power on/off connector / genlock loop through out
17 external genlock in
models AGS-3328-2/-3 and AGS-3390-1/-2 models AGS-3389-0/-1
18 COM2 PCIe ×16 extension cards
19 PCI extension cards … PCIe ×1 extension cards
20 PCI extension cards … COM2
21-24 PCI extension cards like network cards, link interface cards, Barco’s expansion cards etc.
(de-
pending on configuration)
25 mains connection of individual power module
26 PS/2 mouse
(green jack)
27 PS/2 keyboard
(purple jack)
28 2×USB
29 COM1
30 LPT1
31 onboard VGA adapter
32 onboard LAN adapter with the following LED signals:
left LED lightens green a connection exists
blinking green activity
right LED off 10 Mbps connection
lightens green 100 Mbps connection
lightens amber 1000 Mbps connection
33 2×USB
(not on AGS-3390-1/-2)
34 audio, micro
(not on AGS-3390-1/-2)
35 power switch of individual power module
36 green LED: individual power module operating
Figure2-2
Rear view of the P
ROCESSOR
with standard power supply (left), detail with redundant power supply (right)
and details of the rear connection plate of the P
ROCESSOR
Dual Xenon AGS-3390-1/-2 (bottom)