Barco Solaris LD 120-8, Installation & Service Manual, Page: 15 / 88

3. System overview
Image 3-2
Solaris LD display tile (8 millimeter:
R9052700 ; 10 millimeter: R9052710 ).
Re-sync unit
Every tile contains a re-sync unit (A) which can easily be removed. The re-sync unit synchronizes the incoming data stream and
sends it to the next tile. The data ports (B) on the re-sync unit are bidirectional. So, it doesn’t matter on which port the data is coming
in, the re-sync unit switch the functionality of the data ports spontaneously between input and output. Furthermore the re-sync unit
is equipped with status LED’s (C) for diagnostic purposes.
A
B
B
C
Image 3-3
A Re-sync unit (
R9851520 ); B Data ports; C Status LED’s.
Cabling
The display tile is provided with power via a power split cable with a C13 plug. Data cabling between tiles is done with a DVI-DVI
data cable of 0,9 meter.
A
Image 3-4
A : Power input (C14 socket).
Image 3-5
Power split cable (
R9851130 ).
Image 3-6
DVI-DVI data cable of 0,9 meter (
R9851211 ).
3.2 Solaris LD supporting structure
Functionality
The support structure of the Solaris LD consist in a steel framework supporting vertical sub-frames. Such a sub-frame (precision
frame) has the width of one tile and the height of the display. Tiles are mounted between two precision frames. Depending of the
R5976773 SOLARIS LD DISPLAY 02/12/2004 11